Our forms are updated on a regular basis in accordance with the latest amendments in legislation. Plus, with our service, all of the information you provide in the Cdm Driver Package is well-protected against loss or damage through top-notch encryption. The tips below will allow you to fill in Cdm Driver Package quickly and easily. Our service allows you to take the entire procedure of completing legal forms online. As a result, you save hours (if not days or weeks) and eliminate unnecessary expenses. From now on, submit Cdm Driver Package from the comfort of your home, office, and even while on the move.
Install CDM Driver If you are reinstalling the LT-55 XL software on a tablet PC that is meant to be used for templating you will also need to install the CDM Driver which allows the laser to communicate with the tablet PC. FTDI’s CDM drivers provide both D2XX and VCP functionality through a single driver package.
Cdm Driver For Windows 10
If your cheap BMW INPA K+DCAN USB interface with FTDI chip failed to install drivers or the system prompt cannot locate the drivers. Here is a little write-up on how to fix it.
Cdm.dll download. The Cdm.dll file is a dynamic link library for Windows 10, 8.1, 8, 7, Vista and XP. You can fix 'The file Cdm.dll is missing.'
Ftdi Cdm Drivers Windows 10
Disclaimer:
I am using Windows 8.1 system. No sure if it works on yours. You are on your own risk.
Pre-installation caution:
Here are the INPA driver & software, free download links. If the driver/software is working, then ignore the next part. Otherwise take a look at the following part for reference.
INPA Driver: http://www.obd2vip.com/download/inpa-driver.zip（Close antivirus software or set your browser to download success）
INPA software: http://www.obd2vip.com/download/inpa-2.zip
Procedure:
1. Open your Device Manager. Control Panel–Hardware & Sound–Device Manager.
2. Connect the INPA K+DCAN cable with computer/PC-Double click
3. Locate USB Serial Converter->DetailsDropdown Menu->Hardware IDs. The PID number is the one you want. Will most likely be 0000.
4. Download CDM v2.08.30
http://www.ftdichip.com/Drivers/CDM/CDM%20v2.08.30%20for%20Windows%208.1.zip
5. Disable “Driver signature verification” Settings–Change PC Settings–Recovery–Advanced Startup–Restart.
This will restart your PC to Advanced settings. From there: Troubleshoot–Advanced Options–Startup Settings–Restart–F7
Follow these picture guides:
Your PC will then restart with signature verification disabled. You are now able to edit the INPA drivers.
6. Unzip the Drivers file that you just downloaded and open up
7. Open ftdibus.inf
8. Replace every PID_6001 with PID_0000 to match your hardware ID. Scan through the whole document. Then save it.
9. Then find ftdiport.inf. Do the same to ftdiport.inf
10. Back in your Device Manager double click on your OBDII cable again.
Locate USB Serial Convertor Properties->Driver->Update Driver-> Browse my computer.
Locate your driver and install. You will need to install it for both USB Serial Converter and Ports & COM.
11. Setup INPA cable as normal and run INPA software.
Ftdi Usb To Serial Driver
It seems that the white FTDI chip INPA cables have to be manually put into D-CAN mode. This file will take care of that. It is normal for the LED to go out.
http://www.mediafire.com/download/35fnrnd3q3dvf3w/D-CAN.exe
If you put the cable into DCAN mode, the LED goes off, and it says there is no adapter connected. Please connect it to the car and run the DCAN mode.
Cdm Driver Package
Who Viewed This Article Also Views:
Comments are closed.